Functional Windmill Head
For those pond owners that have an existing tower and are interested in simply the windmill head then we offer the Outdoor Water Solutions functional windmill head. This comes with the complete head, blades, functional compressor, tail arms and tail fin. It also includes 100' of airline and 1 airstone diffuser with a backflow valve.
The blade diameter on all units is a full 73" in diameter which is the largest windmill head on the market for pond aeration. This allows our units to pump up to 4.5 CFM of air and still turn at low wind speeds due to our windmill heads higher torque. We can also produce up to 30 psi of air allowing these units to aerate ponds or lakes that are 10', 20' or even 30' deep.
The Outdoor Water Solutions “NEW” Wind Driven Aeration System offers:
Ensure that your windmill tower can support approximately 200 lbs. Your tower will also need to be retrofitted to accept a 2.0" pivot tube that the Windmill Compressor is supported by.
NOTE: We can also powder coat this in your choice of colors and can also personalize the tailfin. A 1 or 2 color powder coated head runs an additional $325.
We also sell a Windmill Retrofit kit that includes the outside DOM steel pipe, a PVC bushing or sleeve and a tapped grease zert. You can find these here.